- Empty cart.
- Continue Shopping
HOW THE GEM
WIRELESS SYSTEM
WORKS
GEM’s controllers can be attached to any standard switching system or string of lights.
It then gets paired to wireless switches that enable flexible switching configurations. It’s a simple no-wiring-in-the-wall installation process that saves time and cost.
GEM’s innovative Wireless Switch Module converts any switch mechanism into a wireless dimmer, and you can use any switch plate design you like.
They are complete units, with no extra hardware required, and can be fixed to any surface.
- New builds, both residential and commercial
- During renovations, home extensions, retrofits
- Commercial premises such as retail and hospitality
- Outdoor living spaces, gardens, driveways, pools
- Building and housing developments of any size
- Within industrial and agricultural developments
Testimonials
Electrical Solutions and Compliance Today Brisbane
Wayne Heydon
I have been using GEM lighting products for years. World class, cutting-edge, durable, and affordable products for an infinite range of switching solutions limited only by imagination. No need to look anywhere else!
If you require control over lighting, pumps, fans or other loads over a long distance, GEM Wireless has you covered. The system reaches up to 2 kilometres.
We have a specific ‘Dimmer’ range and (Google/Amazon/Life) mobile app enables control of the lights with a smartphone or tablet whether you’re at home or out-and-about.
The possibilities are endless, and your cost savings are guaranteed.
Testimonials
Col. Retired Electrical Engineer / Electrical Contractor
I have now used them in a number of impossible situations where friends wanted extra switches for lights in brand new houses after they realised that they didn’t have the flexibility they wanted. I have also used a receiver and switch to control a wall exhaust fan that was wired into an ensuite light circuit in a bathroom where it was impossible to run switch wires to allow separate control of the fan.
As a testament to their reliability, all the receivers / switches that I have installed are still working – even the Show kits from 2017!
Control everything easily from your phone or tablet with the Wireless App.
You can regulate on-and-off settings, timers, dimmers, and more. For in and around the home or your business, GEM has it covered.
HOW THE GEM
WIRELESS SYSTEM
WORKS
The GEM Wireless Switching systems have been designed for difficult wiring jobs or simple multi-way control.
- WORKS WITH ALL LEDs
- DIMMING FROM THE SWITCH
- SMARTPHONE CONTROL
- ENERGY SAVING
SWITCH MODULE
This kit enables the control of lighting, fans, and other loads without needing a switch wire. Just connect the switch module to a conventional switch mechanism and wire in the receiver to the load.
The transmitters are digitally paired to the receiver which can switch loads up to 500 watts. The load is toggled each time the switch operates allowing for 2-way, 3-way or higher configurations.
The receiver fits comfortably in-wall or ceiling spaces and can be wired in with an existing light switch.
Features
- The Switch Module Kit can be used with any conventional light switch (sold by 3rd party wholesalers, Clipsal, HPM etc).
- Kit comes with a Wireless Switch Module (transmitter) and Lighting Controller (receiver).
- All switches in this pack will only operate the included controller.
- No pairing or programming is necessary.
MAINS POWERED MODULE
This kit is a wireless switching solution that operates without Wi-Fi or batteries. Powered directly from mains electricity, it allows you to add a switch anywhere power is available – even where there is no direct wiring to the load. Using long-range RF technology, the system delivers reliable performance up to 300 metres, working through walls and obstacles without interference.
Features
- No Wi-Fi or internet required
- Mains powered transmitter—no batteries to replace
- Switch and receiver come pre-paired
- Supports multiple transmitters for multi-location control
- Supports multiple receivers to control separate loads
- Multiple kits can operate in the same area without interference
- Reliable RF signal up to 300 m through walls and obstacles
Ideal for residential, commercial, and industrial applications where dependable, long-range wireless control is required.
LONG RANGE MODULE
This kit enables the wireless control of lighting, fans, and other loads over long distances or through concrete and steel.
Features
- The Switch Module Kit can be used with any conventional light switch (sold by 3rd party wholesalers, Clipsal, HPM etc)
- Kit comes with a Wireless Switch Module (transmitter) and Lighting Controller (receiver)
- All switches in this pack will only operate the included controller
- 2km line of sight, 500m through urban centre’s
- Will operate through concrete and steel with ease
- No pairing or programming is necessary
Surface Module
This kit is an ideal solution when adding additional switches or when there is limited access to the wall cavity and enables the control of lighting, fans, and other loads without needing a switch wire.
Features
- Just wire in the receiver to the load and then affix the wireless surface mount switch to a wall/panel with sticky pads or two small screws
- The switch is digitally paired to the receiver which can switch loads up to 500 watts
- The load is toggled each time the switch operates allowing for 2-way, 3-way or higher configurations
- The receiver fits comfortably in-wall or ceiling spaces and can be wired in-line with an existing light switch
Find a stockist near you
Testimonials
Kenny King, WhiteRabbit Electrical 20/5/21
The wireless switch kit is great. My customer had a new deck coming off a shed away from the house. I have installed the wireless switch kit to control all the deck and outdoor lighting from the existing supply in the shed. We used the two switch product so it is set up as a two way, one at the deck, one inside the house. Looks great and the customer couldn’t be happier. No doubt Ill be using this product in many different ways for future customers.”